Listening to messages using the base unit, Listening to messages using the handset, Answering system – Panasonic KX-TG1035 User Manual
Page 28: Operating the answering system
Answering System
28
For assistance, please visit http://www.panasonic.com/help
Listening to messages
using the base unit
When new messages have been
recorded, the MESSAGE indicator on
the base unit flashes.
Press {MESSAGE}.
L
The base unit plays new messages.
L
When you have no new messages,
the base unit plays back all
messages.
Operating the answering
system
*1 If pressed within the first 5 seconds
of a message, the previous
message is played.
Erasing all messages
Press {ERASE} 2 times while the unit is
not being used.
Listening to messages
using the handset
When new messages have been
recorded:
– “New message” is displayed.
– The message indicator on the
handset flashes slowly if the message
alert feature is turned on (page 32).
1
{
MENU}
2
{V}
/{^}: “Answering device” i
{
OK}
3
{V}
/{^}: “Play new msg.” or “Play
all msg.
“ i {OK}
4
When finished, press {OFF}.
Note:
L
To switch to the receiver, press {C}.
Calling back (Caller ID subscribers
only)
If caller information was received for the
call, you can call the caller back while
listening to a message.
1
Press {MENU} during playback.
2
{V}
/{^}: “Edit & Call” i {OK}
3
Press {MENU} repeatedly until the
phone number is shown in the
desired format.
4
{C}
Erasing all messages
1
{
MENU}
2
{V}
/{^}: “Answering device” i
{
OK}
3
{V}
/{^}: “Erase message” i
{
OK}
4
{V}
/{^}: “Erase all” i {OK}
5
{V}{^}
: “Yes“ i {OK} i {OFF}
Key
Operation
{>}
or {<}
Adjust the speaker
volume
(during playback)
{
<}
Repeat message
(during playback)
{
>}
Skip message
(during playback)
{
STOP}
Stop playback
{
ERASE}
Erase message
currently playing
TG103x.book 28 ページ ２００８年１２月３日 水曜日 午後１２時５８分