Panasonic KX-TG1035 - Manual (Page 15)

Preparation
For assistance, please visit http://www.panasonic.com/help 15
Date and time
Set the correct date and time.
– To use the available alarm function
(page 25).
– When you play back a message from
the answering system (page 28), the
unit announces the day and time it
was recorded.
1
{ MENU}
2
{V} /{^}: “Set date & time” i
{ OK}
3
{V} /{^}: “Date and time“ i
{ OK}
4 Enter the current month, day, and
year by selecting 2 digits for each.
Example: August 15, 2007
{
0}{8} {1}{5} {0}{7}
5 Enter the current hour and minute
(12-hour clock format) by selecting 2
digits for each.
Example: 9:30
{
0}{9} {3}{0}
6 Press {*} to select “AM” or “PM”.
7
{ OK} i {OFF}
Note:
L When English is selected as the
display language, 12-hour clock
format is used. When Spanish is
selected, 24-hour clock format is
used.
L If you make a mistake when entering
the date and time, press {<}, {>},
{^}
, or {V} to move the cursor, then
make the correction.
L The date and time may be incorrect
after a power failure. In this case, set
the date and time again.
TG103x.book 15 ページ ２００８年１２月３日 水曜日 午後１２時５８分