Panasonic KX-TG1035 - Manual (Page 19)

Phonebook
For assistance, please visit http://www.panasonic.com/help 19
Searching for a name by initial
1
{k}
2
Press the dial key ({0} – {9}) that
corresponds to the first letter you are
searching for (see the character
table, page 18).
Example: “LISA”
Press {5} repeatedly to display the
first phonebook entry starting with
the initial “L” and go to step 3.
L
If there is no item corresponding to
the letter you selected, the next
item is displayed.
3 Press {V} to select the desired item.
4 Press {C} to dial the phone
number.
Editing items in the
phonebook
1 Find the desired item (page 18). i
{
MENU}
2
{V} /{^}: “Edit” i {OK}
3
Edit the name if necessary (see the
character table, page 18). i {OK}
4 Edit the phone number if necessary.
i {OK}
5
{V} /{^}: “Save” i {OK} i {OFF}
Erasing items in the
phonebook
Erasing an item
1 Find the desired item (page 18).
2
{ MENU}
3
{V} /{^}: “Erase” i {OK}
4
{V} /{^}: “Yes” i {OK} i {OFF}
Note:
L Step 2 variation:
Press {CLEAR}, then skip to step 4.
Erasing all items
1
{k}
2
{ MENU}
3
{V} /{^}: “Erase all” i {OK}
4
{V} /{^}: “Yes” i {OK}
5
{V} /{^}: “Yes” i {OK} i {OFF}
Note:
L Step 2 variation:
Press {CLEAR}, then skip to step 4.
Chain dial
This feature allows you to dial phone
numbers in the handset phonebook
while you are on a call. This feature can
be used, for example, to dial a calling
card access number or bank account
PIN that you have stored in the handset
phonebook, without having to dial
manually.
1 During an outside call, press {k}.
2 Find the desired item (page 18). i
{
OK}
Note:
L When storing a calling card access
number and your PIN in the
phonebook as one phonebook item,
press {PAUSE} to add pauses after
the number and PIN as necessary
(page 16).
L If you have rotary/pulse service, you
need to press {*} before pressing
{k}
in step 1 to change the dialing
mode temporarily to tone.
TG103x.book 19 ページ ２００８年１２月３日 水曜日 午後１２時５８分