Palsonic 2418 - Manual (Page 9)

SLEEP BUTTON (REMOTE CONTROL UNIT)
Using SLEEP button allows you to have the appliance automatically turned off a
predetermined time, and set the appliance to stand by mode.
After the SLEEP function is set, the remaining time will be automatically displayed for 4
seconds every ten minutes.
* If you press STAND BY button while the SLEEP function is operating, the SLEEP function
will be cancelled automatically.
TIMER OPERATION (REMOTE CONTROL UNIT)
Using TIMER button to select one of three timer modes, which are CLOCK mode, ON
TIMER mode and OFF TIMER mode respectively.
8
TIMER
Press
again
Press
Decrease 10 minutes
at every press
SLEEP
Press
again
TIME
CLOCK
1. Press the TIMER button until "CLOCK" displays on screen.
2. Press button to set the preset hour.
Press button to set the preset minute.
3. After setting the clock, press TIME button to start operating.
.
SLEEP 90
(GREEN)
SLEEP 0
(RED)
SLEEP 10
(GREEN)
.
CLOCK
AM 12 : 00
1 ON TIME
AM 12 : 00
OFF TIME
AM 12 : 00
.
CLOCK
AM 12 : 16
CLOCK
AM 12 : 00