Palsonic 2418 - Manual (Page 7)

0 1 2 58 59
SKIP BUTTON:
FUNCTION:
When CHANNEL SELECTOR button is used to select channels, the channel will be skipped
if they are set to "SKIP" mode. For example: Set 2~7 channels to "SKIP" mode, the
procedure of channel position increasing or decreasing.
(REMOTE) (THE APPLIANCE)
OPERATION:
1. Press PSET (PRESET ON/OFF) button to set preset mode.
2. Select a channel by using CHANNEL SELECTOR button.
3. Press "SKIP" button, "SKIP" will be displayed on the screen to indicate that the channel is
at "SKIP" mode.
4. Repeat 2 ~ 3 steps to skip another channel.
5. Press PRESET ON/OFF button to exit preset mode.
SOUND CONTROL:
VOLUME CONTROL
Press the VOL button on the appliance or the Remote Control Unit to increase volume;
the red block on the screen moves right.
Press the VOL button on the appliance or the Remote Control Unit to decrease volume;
the red block on the screen moves left.
When there is a phone-call or a visitor, it can temporarily shut off the sound without
affecting the picture.
To resume normal, press the MUTE or VOLUME ( ) button. The previous volume
will be displayed for 4 seconds.
6
3 SKIP
llllllllllllll
8
MUTE BUTTON (REMOTE CONTROL UNIT)
.
.
SKIP
CHANNEL DECREASE
CHANNEL INCREASE
0 1 2 58 59
CH
CH CH
.
.