Pioneer GEX-AIRWARE1 - Manual (Page 9)

16 17
Activating Your AirWare
Turn the dial to highlight channel 0, and press the dial in
to select it. You should see an 8-character XM Radio ID
in the display. (The XM Radio ID should also be on your
AirWare’s package and under the battery.) Write the ID here:
The XM Radio ID does not use the letters I, O, S, and F.
Activate your XM Satellite Radio service by contacting
XM at http://activate.xmradio.com or by calling
1.800.XM.RADIO (1.800.967.2346). You will need the
XM Radio ID and a major credit card.
XM will send a signal from the satellites to activate the
full channel lineup. Activation normally takes 10 to 15
minutes, but during peak busy periods, you may need to
keep your AirWare on for longer to complete the
activation process. When you can access the full channel
lineup on your AirWare, you’re done!
Go Ahead!
Rotate the dial to preview a list of channels. When you
find one you’re interested in, press the dial in to tune to
that channel.
Listening To XM
Changing channels
1. Rotate the side dial to preview a list of channels.
2. When your desired channel is highlighted, press the
dial in to select that channel.
-OR-
1. Press the “ pre/dir” button until the word
“DIRECT” flashes in the display.
2. Press the number keys corresponding to a channel
number. For channel 8, press “ 8.” For channel 130,
press “1,” then “3,” then “0.”
-OR-
1. Press the “ ” or “ ” buttons while in “LIVE” mode.
You will see the channels organized by category.
2. Rotate the dial to highlight a channel. Press the dial in
to select that channel.
PI Radio Artwork
Note: Keypad Artwork for laser etching of painted surfaces
02.16.04 02.16.04
Note: Faceplate Artwork IMD parts
Note: Power and scroll wheel for screen printing - COLOR TBD
Note: Phone and RF icon are be to molded in to the receiver
2
1
user_gd_engfinl6.r5.qxd 3/29/05 7:50 PM Page 16