Pioneer GEX-AIRWARE1 - Manual (Page 8)

14 15
Setting Up
Assembly
Insert the battery and assemble your AirWare and its home
stand as shown; plug the AC adaptor into an outlet. Let
the battery charge for at least three hours.
Important! You will need to fully charge your AirWare
battery for at least three hours to have sufficient battery
power for portable use.
Insert battery
Assemble home docking
station
Connecting to a stereo
Plug the AC adaptor into an outlet. Connect the home
antenna and connect the line out to either your home
stereo or powered (PC type) speakers.
Receiving the XM signal
Turn your AirWare on by pressing the power button. You
should be able to hear channel 1, the XM Preview
Channel. If you do not, and the screen displays “NO
SIGNAL,” try moving your AirWare’s antenna to another
location. Make sure the antenna points south, either
outdoors or through a window. If the “NO SIGNAL”
message persists, refer to “Aiming the home antenna”
(page 30).
Please read the TIP below the illustration for optional
setup and activation procedure information.
TIP: Establishing a good signal environment in the home or
office setup is highly desirable, but this is not the only way
you can receive the XM signal. As an option, you can refer to
“Using AirWare In Your Vehicle” (page 31) and continue this
setup and activation process with your AirWare installed
in a vehicle.
Connect to stereo
Aim antenna
user_gd_engfinl6.r5.qxd 3/29/05 7:50 PM Page 14