Pioneer GEX-AIRWARE1 - Manual (Page 20)

38 39
TIP: Both the home and vehicle power adaptors can be
used independently from the home docking station and
vehicle docking station, plugging directly into the AirWare
power connector. This feature provides a convenient
alternative for battery charging and powered operation
when traveling or for using your AirWare away from home.
Optional Accessories (sold separately)
We’re always developing useful and clever accessories
for your AirWare. Check out www.xmradio.com or visit your
favorite electronics retailers frequently.
Troubleshooting
Your AirWare should provide you with trouble-free
performance without needing any servicing. If it
does not appear to be working properly, first try to
remedy the problem by following these steps:
1. Attach all connections firmly and securely.
2. Make sure the battery is fully charged.
3. Reset your AirWare by removing the battery cover and
inserting a paper clip into the hole marked “RESET” at the
upper left-hand corner of the case.
If you see this on the display:
NO SIGNAL
Cause: The XM signal is being
blocked.
ANTENNA
Cause: Possible problem with
the built-in or external XM
antenna.
Cause: When using home
docking station or vehicle
docking station, home or vehicle
antenna is not plugged in.
OFF AIR
Cause: The channel is not
currently broadcasting.
LOADING
Cause: Your AirWare is acquiring
audio or program information
from the XM signal.
UPDATING
Cause: Your AirWare is being
updated with the latest
encryption code.
Cause: You may have tried
to tune to a channel that
you have blocked or that
you cannot receive with your
subscription package.
You should:
Move your AirWare away from
obstructed area, e.g. an
underground garage.
Connect the external antenna.
Make sure the cable and
connector are not damaged
or kinked.
Make sure the home or vehicle
antenna is plugged into the
home docking station or
vehicle docking station, even if
the wearable antenna is already
plugged into the receiver.
Tune to another channel.
This message should
disappear in a few seconds
in good signal conditions.
Simply wait a few seconds
until the update is done.
To receive that channel,
contact XM Satellite Radio
at 1.800.967.2346.
user_gd_engfinl6.r5.qxd 3/29/05 7:50 PM Page 38