Philips PVD1075/12 - Manual (Page 9)

3 Getting started
3.1 Stand installation
Use the stand to place the TV set on a fl at surface. To install the stand,
align the catches on the stand base with the slots at the bottom of the
set, as shown in the fi gure below. Then fi t the stand into the slots and
turn anticlockwise until you hear a "click" sound.
2
1
Note: When you install the TV on the wall (refer to the Wall Mounting
section), please release the stand. To release the stand, lift up the latch and
turn the stand clockwise.
3.2 Connecting to antenna for either home
antenna or auxiliary antenna
Insert the aerial plug fi rmly into the 75 Ω aerial socket on the right side
of the TV and in the wall antenna socket.
3.3 Charging the TV set
Plug in the AC/DC adaptor.
PDV1075_12_A_CCR.indd 9 PDV1075_12_A_CCR.indd 9 2007-10-24 11:06:31 AM 2007-10-24 11:06:31 AM