Philips DC185 - Manual (Page 14)

PROGRAMING TRACK NUMBERS
1 Press MODE to enter the programming mode.
2 Press
¡1 / 2™ to select a desired album number.
™ The current album number flashes.
3 Press MODE to confirm.
4 Press
¡1 / 2 ™ to select a desired track number.
™ The current track number flashes.
5 Press MODE to confirm.
6 Repeat steps 2-5 to select and store all desired tracks.
7 To start playback of your programme, press
2;.
Helpful hints:
– Up to 999 playable audio files stored on a USB mass storage device can be
played on DC185.
– Up to 99 playable albums stored on a USB mass storage device can be select-
ed and displayed on DC185.
– Make sure that file names of MP3 files end with .mp3. and the file names of
WMA files end with .wma.
– For DRM protected WMA files, use Windows Media Player 10 (or later) for
conversion. Visit www.microsoft.com for details about Windows Media
Player and WM DRM (Windows Media Digital Rights Management).
– For USB device playing, if the display shows "OL", it means that the USB
device is electrically overloading DC185. You need to change a USB device.
CONNECTING AN EXTERNAL DEVICE
You can listen to the sound of the connected external device through your
DC185’s speakers.
1 Press SOURCE repeatedly to select AUX mode.
2 Use the supplied AUX-IN cable to connect DC185’s AUX IN jack to an AUDIO
OUT or headphone jack on an external equipment (such as CD player, or VCR).
IFU_DC185_12_eng 2008.7.24 4:03 PM Page 14