beautypg.com

Ch 1-5 unbalanced inputs, What you’ll need, Before connecting – Parasound A 52 User Manual

Page 6: You should know write down your connections, Five shielded interconnect cables with rca plugs, A surround controller with five rca output jacks

background image

CONNECTING A SURROUND CONTROLLER
TO THE UNBALANCED INPUTS ON YOUR A 52

4

Ch 1-5 Unbalanced Inputs

Use these inputs if your surround controller doesn’t have balanced output connectors or if you
simply prefer to use unbalanced connections.

What You’ll Need:

Five shielded interconnect cables with RCA plugs

A surround controller with five RCA output jacks

Before Connecting

❑ Leave the AC cord on the A 52 disconnected until you have made all other connections

to prevent any surprise burst of sound.

❑ Make sure that all your cables are long enough so they are not pulled or stretched

once they are connected.

❑ Make sure the Balanced-Unbalanced Inputs selector switch on the A 52 is in its

Unbalanced (lower) position and the Ground switch is in its Normal (lower) position.

To Connect

1 Plug one end of the cable into the Unbalanced Ch 1 Input jack on the A 52.
2 Plug the other end of the cable into the unbalanced output jack for the channel

on your surround controller that you wish to correspond to Ch 1 on your A 52.

3 0 Repeat steps 1 and 2 for Ch 2, Ch 3, Ch 4, and Ch 5.

YOU SHOULD KNOW

Write Down Your Connections

Make a note of which channel on your surround controller now connects to each channel
of the A 52 so you’ll always hear the channels in their intended position and to facilitate
trouble-shooting in case you encounter a problem later on.

SURROUNDŁ

CONTROLLER

OUTPUTS

2

4

6

8

10

Ch 1

Ch 2

Ch 3

Ch 4

Ch 5

Input

Balanced

Unbalanced

Input

Balanced

Unbalanced

Input

Balanced

Unbalanced

Input

Balanced

Unbalanced

Input

Balanced

Unbalanced

Man

Balanced

Inputs

Unbalanced

Input

12 V

Output

Audio

Sensitivity

50 mV 250

Ground

Normal

Lift

WARNING

To Prevent Fire Or Shock Hazard,

Do Not Expose This Unit To Rain

Or Moisture.

Fuse

T15A/250V1-115V Area

T8A/250V-230V Area

AC 115V 60Hz
AC 230V 50Hz

Power Consumption: 1350W

Parasound Products, Inc.

San Francisco, CA USA

Manufactured under

license from Lucasfilm

Ltd. Lucasfilm and THX

are registered Trademarks

of Lucasfilm Ltd.

CAUTION

To Prevent Electric Shock, Do Not

Remove Cover. No User-Serviceable

Parts Inside, Refer Servicing To

Qualified Service Personnel.

Auto Turn On

L U C A S F

I

L M

L M

1

3

5

7

9

Ground Switch,
set to down position

Inputs Switch,
set to down position

RCA Plugs