Error messages, Additional information 12 – Pioneer HTD8DVD User Manual
Page 77
Additional information
12
77
En
Error Messages
Sound is mono only.
• Check that the tuner is not set to FM mono (see
Improving poor FM
reception
on page 35).
Considerable noise in
radio broadcasts.
• Tune into the correct frequency.
• Connect the antenna (see
Connecting the supplied antennas
on page 18
and
Connecting external antennas
on page 71).
• Fully extend the FM wire antenna, position for best reception, and
secure to a wall.
• Connect an outdoor FM antenna (see
Connecting external antennas
on
page 71).
• Adjust the direction and position for best reception.
• Connect an additional internal or external AM antenna (see
AM loop
antenna
on page 18 and
Connecting external antennas
on page 71).
• Turn off any other equipment that may be causing the noise or move it
away from the system unit.
• The tuning interval is incorrect for your country or region. Try switching
the tuning interval (frequency step) (see
TV attenuator setting
on page 67).
Problem
Remedy
Message
Description
Child Lock
• This message appears when the front panel buttons are pressed when
the child lock feature is active. See
Child lock setting
on page 67 for more
on switching on/off the child lock.
Rec Mode On
• Blinks rapidly for 2 seconds when an operation is prohibited because
the Recording Mode is on (see
Recording mode
on page 72).
Phones In
• Blinks rapidly for 2 seconds when an operation is prohibited because
headphones are connected.
96k Stereo
• Blinks rapidly for 2 seconds when an operation is prohibited because
the source is digital 88.2 kHz or 96 kHz PCM.
No Surr. SP
• Blinks rapidly for 2 seconds when an operation is prohibited because
there is no surround speaker output.
Muting
• Blinks rapidly for 2 seconds when an operation is prohibited because
the sound is muted (press the
MUTE
button to turn the sound on).
Exit
• Appears briefly when a menu is automatically exited after a set period of
inactivity.
SR+ Error
• Appears when there is a communication problem between the unit and
the plasma display. Check all connections and retry.
XV-DV88.book 77 ページ 2006年11月9日 木曜日 午後2時28分