01 before you start, Features, What’s in the box – Pioneer HTD8DVD User Manual
Page 7: Putting the batteries in the remote control, Before you start, Before you start 01, Chapter 1
Before you start
01
7
En
Chapter 1
Before you start
Features
•
24-bit / 96 kHz compatible DAC
This system is fully compatible with high
sampling-rate discs, capable of delivering
exceptional sound quality in terms of dynamic
range, low-level resolution and high-frequency
detail.
•
Surround sound entertainment with
Dolby Digital and DTS software
The built-in Dolby Digital and DTS decoders let
you enjoy great surround sound with Dolby
Digital and DTS discs.
•
Pure Cinema progressive scan video
When connected to a progressive scan-
compatible TV or monitor using the
component video outputs, you can enjoy
extremely stable, flicker free images, with the
same frame refresh rate as the original movie.
•
Super VCD compatibility
See
Disc / content format playback compatibility
on page 8.
•
Picture zoom
See
Zooming the screen
on page 51.
•
MP3 and WMA compatibility
See
Compressed audio compatibility
on page 9.
•
JPEG compatibility
See
JPEG file compatibility
on page 9.
•
Graphical on-screen displays
Setting up and using your DVD home theater
system is made easy using the graphical on-
screen displays.
•
Energy saving design
This system is designed to use 0.5 W of power
when in standby.
What’s in the box
Please confirm that the following accessories
are in the main system box when you open it.
• Remote control
• AA/R6P dry cell batteries (HTD88DVD
model – to confirm system operation) x2
• Video cable (yellow plugs)
• AM loop antenna
• FM wire antenna
• Power cord
(Central and South American model x2)
• Power plug adapter (Central and South
American model, PX model)
• These operating instructions
• Warranty card (Australian and PX model only)
Please confirm that the following accessories
are in the speaker box when you open it.
• Speaker cables x6 (HTD8DVD model only)
• Non-skid pads for speakers
(HTD8DVD model – 2 sheets)
(HTD88DVD model – 1 sheet)
Putting the batteries in the
remote control
•
Open the battery compartment cover
and insert the batteries as shown.
Use two AA/R6P batteries and follow the
indications (
,
) inside the compartment.
Close the cover when you’re finished.
XV-DV88.book 7 ページ ２００６年１１月９日 木曜日 午後２時２８分