Porter-Cable 4210 - Manual (Page 25)

25
MAINTENANCE
ACCESSORIES
KEEP TOOL CLEAN
Periodically blow out all air passages with dry compressed air. Clean all plastic parts with a soft damp cloth. NEVER
use solvents to clean plastic parts. They could possibly dissolve or otherwise damage the material.
WEAR ANSI Z87.1 SAFETY GLASSES WHILE USING COMPRESSED AIR.
SERVICE AND REPAIRS
All quality tools will eventually require servicing or replacement of parts due to wear from normal use. These
operations, including brush inspection and replacement, should ONLY be performed by either an AUTHORIZED
PORTER-CABLE SERVICE STATION or a PORTER-CABLE·DELTA FACTORY SERVICE CENTER. All repairs made by
these agencies are fully guaranteed against defective material and workmanship. We cannot guarantee repairs made
or attempted by anyone other than these agencies.
Should you have any questions about your tool, feel free to write us at any time. In any communications, please give
all information shown on the nameplate of your tool (model number, type, serial number, etc.).
A complete line of accessories is available from your Porter-Cable
•Delta Supplier, Porter-Cable•Delta Factory
Service Centers, and Porter-Cable Authorized Service Stations. Please visit our Web Site www.porter-cable.com
for a catalog or for the name of your nearest supplier.
Since accessories other than those offered by Porter-Cable •Delta have not been tested with
this product, use of such accessories could be hazardous. For safest operation, only
Porter-Cable
•Delta recommended accessories should be used with this product.