7 adjust sound, Adjust volume level, Mute sound – Philips DC290/05 User Manual
Page 14: Select a preset sound effect, Enhance bass, 8 product information, Specifications, Adjust volume level 1, Mute sound 1, Select a preset sound effect 1
15
8 Product
information
Note
Product information is subject to change
•
without prior notice.
Specifications
Amplifier
Rated Output Power
2 x 5 W RMS
Frequency Response
20 -20000 Hz, -3dB
Signal to Noise Ratio
>67 dB
Total Harmonic
Distortion
<1%
Aux Input (MP3 link)
0.5 V RMS 20kohm
Tuner
FM
Tuning Range
87.5 - 108 MHz
Tuning grid
50 KHz
Sensitivity
- Mono, 26dB S/N Ratio
- Stereo, 46dB S/N
Ratio
<22 dBu
<43 dBu
Search Selectivity
>28dBf
Total Harmonic
Distortion
<2%
Signal to Noise Ratio
>55 dB
Speakers
Speaker Impedance
4 ohm
Speaker Driver
2.25”
Sensitivity
>84dB/m/W
7 Adjust sound
Adjust volume level
1
During play, press VOL +/- to increase/
decrease the volume level.
Mute sound
1
During play, press MUTE to mute/unmute
sound.
Select a preset sound effect
1
During play, press DSC repeatedly to
select:
[POP] (pop)
•
[JAZZ] (jazz)
•
[CLAS] (classic)
•
[ROCK] (rock)
•
FLAT (flat)
•
Enhance bass
1
During play, press DBB to turn on or off
dynamic bass enhancement.
If DBB is activated, [DBB] is displayed.
»
English
EN
DC290_05_UM_V1.2_EN.indd 15
8/6/2010 2:58:46 PM