Philips DC290/05 - Manual (Page 13)

14
To deactivate sleep timer
1
Press SLEEP repeatedly until [OFF] (off)
is displayed.
When the sleep timer is deactivated, »
disappears on the display.
Adjust display brightness
1
Press BRIGHTNESS/REP ALM
repeatedly to select different levels of
display brightness.
Activate and deactivate the alarm
timer
1
Press ALM 1 or ALM 2 repeatedly to
activate or deactivate the timer.
If the timer is activated, [ » AL 1] or
[ AL2] is displayed.
If the timer is deactivated, [
» AL1] or
[ AL2] disappears.
Repeat alarm
1
When the alarm rings, press
BRIGHTNESS/REP ALM.
The alarm repeats ringing minutes later. »
Tip
You can press • / to adjust the interval to
repeat alarm.
Stop alarm ring
1
When the alarm rings, press the
corresponding ALM 1 or ALM 2.
The alarm stops but the alarm settings »
remain.
View the alarm settings
1
Press ALM 1 or ALM 2.
Set the sleep timer
This unit can switch to standby automatically
after a set period of time.
1
Press SLEEP repeatedly to select a set
period of time (in minutes).
When the sleep timer is activated, the »
display shows , and the volume will
gradually decrease in the last 5 minutes.
EN
DC290_05_UM_V1.2_EN.indd 14 8/6/2010 2:58:46 PM