Pioneer S-DV440 - Manual (Page 32)

Playing discs 05
32
En
Tip
• Another way to find a particular place on a
disc is to use one of the search modes. See
Searching a disc on page 35.
Looping a section of a disc
The A-B Repeat function allows you to specify
two points (A and B) within a track (CD and
Video CD) or title (DVD) that form a loop which
is played over and over.
• You can’t use A-B Repeat with Super VCD
or WMA/MP3 discs.
1 During playback, press HOME MENU
and select ‘Play Mode’.
2 Select ‘A-B Repeat’ from the list of
functions on the left.
3 Press ENTER on ‘A(Start Point)’ to set
the loop start point.
4 Press ENTER on ‘B(End Point)’ to set the
loop end point.
After pressing ENTER , playback jumps back to
the start point and plays the loop.
• The minimum loop time is 2 seconds.
5 To resume normal playback, select ‘Off’
from the menu.
Using repeat play
There are various repeat play options,
depending on the kind of disc loaded. It’s also
possible to use repeat play together with
program play to repeat the tracks/chapters in
the program list (see
Creating a program list on
page 34). However, note that you can’t use
repeat and random play at the same time.
1 During playback, press HOME MENU
and select ‘Play Mode’.
2 Select ‘Repeat’ from the list of functions
on the left.
3 Select a repeat play option.
If program play is active, select Program
Repeat to repeat the program list, or Repeat
Off to cancel.
• For DVD discs, select Title Repeat or
Chapter Repeat (or Repeat Off ).
• For CDs and Video CD/Super VCDs, select
Disc Repeat or Track Repeat (or Repeat
Off ).
• For WMA/MP3 discs, select Disc Repeat ,
Folder Repeat or Track Repeat (or
Repeat Off ).
A(Start Point)
B(End Point)
Off
A-B Repeat
Repeat
Random
Program
Search Mode
Play Mode
Title Repeat
Chapter Repeat
Repeat Off
A-B Repeat
Repeat
Random
Program
Search Mode
Play Mode
Title Repeat
Chapter Repeat
Repeat Off
A-B Repeat
Repeat
Random
Program
Search Mode
Play Mode
XV-DV323.book 32 ページ ２００４年２月１０日 火曜日 午後６時１０分