Philips REM380 - Manual (Page 3)

3
Key Charts
1 Red Indicator Light
The Red Indicator Light blinks to show
that the remote control is working and
also provides feedback during program-
ming sequences.
2 Component Keys
Press TV, VCR, CBL, AUD, DSS, or CD once
to select a home entertainment compo-
nent to control.
3 CH Keys
Use CH + (or CH -) to select the next
higher (or lower) channel for the selected
home entertainment component.
4 VOL Keys
Use VOL + (or VOL -) to raise (or lower)
the sound volume.
5 I-TV Key
Press I-TV to access the On-Screen Menu
for your home entertainment compo-
nents (see page 8).
6 EXIT Key
Use EXIT to exit out of the selected com-
ponent’s menu or guide.
7 SELECT Key
Use SELECT to choose options from your
selected component’s menu or guide.
8 GUIDE Key
Use GUIDE to display the programming
guide for your components (if applicable).
9 MUTE Key
Press MUTE once to turn sound off or on.
0 LAST Key
Press LAST once to recall the last channel
and to page back one screen in the
main menu.
q SLEEP Key
Press SLEEP to activate your TV’s internal
sleep timer.(Not available for all TVs.)
w LIGHT Key
Press LIGHT once to turn on or off the
keypad back light.
e POWER Key
Press POWER once to turn on or off the
selected home entertainment component.
r Keypad
Use the keypad (0 ~ 9) to directly enter
in channels (for example, 09 or 31). The
keypad is also used for all programming
sequences, such as entering in your pro-
gramming codes.
t SCAN Key
Press SCAN once to change channels every
3 seconds. Press it again to stop the scan.
y ENTER Key
Press ENTER once after entering channel
numbers on some TV models.
u VCR Transport Keys
Use the VCR Transport Keys to control
your VCR, as well as CD or DVD player.
Press REC twice to record a tape.
i FC1 and FC2 Keys
User-programmable Favorite Command
Keys (see page 9 for details).
o MCP Key
Multiple-component On/Off Key (see
page 8 for details).
p TV/VCR Key
Press TV/VCR once to view VCR playback
or TV through the VCR.
a SET Key
Use SET for all programming sequences.
Before using your new I-TV remote control,
you will need to obtain and install new bat-
teries, as described on the next page. Then you’ll also need to program the I-TV
remote control with the correct code num-
bers for your specific components. See
instructions starting on page 5.
SETTING UP YOUR REMOTE CONTROL
KEYS AND FUNCTIONS (continued)
REM380 Manual Engl 12/28/99 12:10 PM Page 3