Panasonic KX-TA624 - Manual (Page 34)

2-6 Station Programming (Personal Programming)
2.2 Station Programming (Personal Programming)
Call Waiting Tone Type Assignment
Allows you to select the call waiting tone type (Tone 1 or Tone 2).
— Be sure that you are in the Station Programming mode. Set the MEMORY switch to
“PROGRAM”.
— To exit the Station Programming mode, set the MEMORY switch to “SET”.
Conditions
• The tone type patterns are described in the Appendix (Section 5).
• The default is “Tone 1”.
Feature References
Busy Station Signaling (BSS)
Call Waiting
PT
Dial 5.
5
Press STORE.
AUTO DIAL
STORE
1 2 or
Dial 1 or 2.
1 : to select Call Waiting Tone 1
2 : to select Call Waiting Tone 2
• The STORE indicator lights.
• The display shows the initial programming mode.
• The display shows the current tone type.