Panasonic D-Snap SV-AS10 - Manual (Page 42)

42
Setting the White Balance
(Manual)
1
Access the menu in the recording
mode
. (P17)
Select Manual from White balance.
2
Aim the unit at a sheet of white
paper
A or similar object so that it
completely fills the frame to white on
the LCD monitor and press the jog
ball.
• White balance is set.
• When taking a picture with the flash
after setting the white balance
manually, the white balance may not
be properly adjusted. We recommend
setting the white balance to Auto
when using the flash.
• The white balance may not be able to
be set manually in too bright or dark
places. In this case, set the white
balance to the mode other than
Manual.
SV-AS10_EB.book 42 ページ ２００３年９月４日 木曜日 午後４時３分