Panasonic DMC-FZ50 - Manual (Page 76)

Advanced
76
VQT0X92
Motion Picture Mode
1 Press the shutter button halfway
to focus and then press it fully to
start recording.
• When the subject is focused, the focus
indication lights.
• The aperture value is fixed to the
setting when recording starts (first
frame).
• The available recording time is
displayed on the top right and the
elapsed recording time
is displayed
on the bottom right of the screen.
For example, 1 hour 20 minutes and
30 seconds is displayed as
[1h20m30s].
• The available recording time and the
elapsed recording time are
approximations.
• Audio recording starts simultaneously
from the camera’s built-in microphone.
• If you rotate the focus ring or zoom
ring while recording motion pictures,
a grinding noise may be recorded.
2 Press the shutter button fully to
stop recording.
• If the card becomes full in the middle of
recording, the camera stops recording
automatically.
w Changing the settings for the aspect
ratio and the picture quality
1 Press [MENU/SET].
2 Press to select
[ASPECT RATIO] and then press
.
3 Press to select the item and
then press [MENU/SET].
4 Press to select
[PICT.MODE] and then press .
5 Press to select the item and
then press [MENU/SET].
If you selected [ ] on the screen
shown in step 2
If you selected [ ] on the screen
shown in step 2
• fps “frames per second”; This refers to
the number of frames used in 1 second.
R 21
5
Item Picture size fps
[30fpsVGA]
640 M480 pixels
30
[10fpsVGA] 10
[30fpsQVGA]
320 M240 pixels
30
[10fpsQVGA] 10
Item Picture size fps
[30fps16:9]
848 M480 pixels
30
[10fps16:9] 10
REC 1 / 3
AUTO
WB ADJUST.
PICT.MODE
W.BALANCE
10 10
METERING MODE
SELECT SET MENU
ASPECT RATIO
REC 1 / 3
AUTO
WB ADJUST.
W.BALANCE
10 10
METERING MODE
SELECT SET MENU
ASPECT RATIO
PICT.MODE