Pioneer DJm-909 - Manual (Page 24)

24
EFFECT FUNCTIONS
Effect Parameters
The 50 built-in effects can be modified by parameters for time and amount to produce a wider variety of effects. Operate the TIME/
SELECT dial to adjust time parameters (parameter 1), and use the MIX/DEPTH dial to adjust amount parameters (parameter 2).
Also with fader effects, the position of the fader lever can be used to produce changes resulting in an even wider range of effects.
7 Beat effects
No.
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
Name
DELAY (*1)
ECHO (*1)
PAN ECHO (*1)
PITCH ECHO (*1)
REVERSE DELAY (*1)
DUCKING ECHO (*1)
ROLL (*2)
HOLD ECHO (*1) (*2)
MULTI TAP DELAY (*1)
RAIN (*1)
REVERB1 (*1)
REVERB2 (*1)
REVERB3 (*1)
PITCH SHIFTER1
PITCH SHIFTER2
PAN
TRANS
RHYTHM TRANS
TRANS PAN
TREMOLO
VIBRATO
CHORUS1
CHORUS2
CHORUS3
FLANGER1
FLANGER2
Parameter 1 (TIME/SELECT dial)
Explanation
Set delay time.
Set delay time.
Set delay time.
Set delay time.
Set delay time.
Set delay time.
Set effect time.
Set delay time.
Set effect time.
Set effect time.
Reverberation time
Reverberation time
Delay time
Set pitch to be changed.
Set type of harmonization.
Set effect time.
Set effect time.
Set effect time.
Set effect time.
Fine setting of modulation
period.
Fine setting of modulation period.
Set period of chorus modulation.
Set period of chorus modulation.
Set period of chorus modulation.
Set period of flange effect
frequency shift.
Set period of flange effect
frequency shift.
Setting range (unit)
1 – 10000 (msec)
1 – 10000 (msec)
1 – 10000 (msec)
40 – 10000 (msec)
10 – 10000 (msec)
1 – 10000 (msec)
10 – 10000 (msec)
2 – 10000 (msec)
8 – 1200 (msec)
40 – 10000 (msec)
10 – 200 (%)
10 – 200 (%)
10 – 5000 (msec)
–100 to +100 (%)
1 – 5
10 – 16000 (msec)
10 – 16000 (msec)
10 – 8000 (msec)
10 – 2000 (msec)
10 – 16000 (msec)
1 – 16000 (msec)
10 – 32000 (msec)
10 – 32000 (msec)
10 – 32000 (msec)
10 – 32000 (msec)
10 – 32000 (msec)
Parameter 2 (MIX/DEPTH dial)
Explanation
Set balance between source and delay
sounds.
Set balance between source and echo
sounds.
Set balance between source and echo
sounds.
Set balance between source and echo
sounds.
Set balance between source and delay
sounds.
Set balance between source and echo
sounds. No effect sounds will be heard if the
input sounds are above a certain level even
when the dial is rotated fully to the right.
Set balance between source and ROLL
sounds.
Set balance between source and echo
sounds.
Set balance between source and delay
sounds.
Rotate to right to increase effect.
Change amount of reverberation.
Change amount of reverberation.
Change volume of echo sound + reverb sound.
Set balance between source and pitch-shifted
sounds.
Set balance between source and pitch-shifted
sounds.
Set balance between source and effect
sounds.
Set balance between source and effect
sounds.
Set balance between source and effect
sounds.
Set balance between source and effect
sounds.
Change the sound volume waver.
Change the frequency waver.
Change the chorus sound volume.
Change the chorus sound volume.
Change the chorus sound volume.
Rotate to right for stronger effect.
Rotate to right for stronger effect.