Pioneer DJm-909 - Manual (Page 23)

23
EFFECT FUNCTIONS
Presetting Effects
Of the effects displayed on the touch panel’s main page
(effect type menu), three types can be set for each channel
CH-1 and CH-2 in the BANK buttons (1/2/3). The preset
effects can then be called up at a single touch.
1. Select the channel (CH-1/CH-2) whose preset
value you wish to change.
• Press and hold depressed for about one second the
FADER CURVE/BANK EDIT button corresponding to
the channel (CH-1/CH-2) in which you wish to change
the effect setting. The touch panel will change to show
the effect selection menu for the chosen channel.
2. Change the effect
1Press the BANK button (1/2/3) whose setting you wish
to change.
2Of the three touch panel buttons, press (touch) the one
in which you wish to record a new effect.
3Rotate the TIME/SELECT dial to select effect.
4Press (touch) the touch panel’s MEMORY button.
If a different BANK button is pressed or EFFECT switch
operated without first pressing the MEMORY button,
no effect will be recorded.
• Up to three effects can be recorded in a single BANK
button. Repeat steps 2–4 to record the presets.
3. Leave the effect selection (BANK EDIT) menu
• Press the FADER CURVE/BANK EDIT button to leave
the effect selection menu.
MAX MIN TAP TAP
TIME/SELECT
MIX/DEPTH
EFFECT EFFECT
MAX MIN
TIME/SELECT
MIX/DEPTH
BANK 3
FX ADJ. FX ADJ.
BANK
EDIT BANK
EDIT
FADER
CURVE
FADER
CURVE
OFF
ON
LOCK ON
PROFESSIONAL 2CHANNEL MIXER
DJM-909
BANK 2
BANK 1 BANK 1
BANK 2
BANK 3
EDIT 1 CH
TIME
AUTO
FOOT
LOW MID HI LOW MID HI
2 0 0 0
1 2 0 AUTO 1 2 0
BPM
ms
EDIT 2 CH
PICH 0
BPM
%
MAX MIN TAP TAP
TIME/SELECT
MIX/DEPTH
EFFECT EFFECT
MAX MIN
TIME/SELECT
MIX/DEPTH
BANK 3
FX ADJ. FX ADJ.
BANK
EDIT BANK
EDIT
FADER
CURVE
FADER
CURVE
OFF
ON
LOCK ON
PROFESSIONAL 2CHANNEL MIXER
DJM-909
BANK 2
BANK 1 BANK 1
BANK 2
BANK 3
CH 1 BANK EDIT
1 . DE L A Y
2 . ECHO
3 . PAN EC
EC
EC
4 . P I T
5 . RV
6 . DK
7 . R
N
OL
DL Y
EC
DL Y
L
8 . HLD
9 . T
1 0 .
1 1 .
P
RA I
REVB 1
1 2 . REVB 2