Panasonic CU-C24BKP6 - Manual (Page 6)

5
PREPARATION BEFORE OPERATION
■ Indoor Unit
1
Connect the power supply cord to an independent
power supply
2
Open the front panel
3
Remove the air filters
4
Fit the air purifying filters in place
5
Insert the air filters
6
Close the front panel
■ Remote Control
– To set the current time
1
Press 1.
2
Then press 2 to increase or decrease the time.
3
Press 1 again.
Set time at display will light up.
CHECK
AUTO
AUTO HEAT DRY FAN COOL
FAN
AUTO
RESET CLOCK
FAN SPEED
AIR SWING
OFF CANCEL
ON SET
1 2 3
TIMER
1
2
6
2 1
4 5
3
HOW TO OPERATE
■ To start the operation
• Press 1.
• POWER indicator (green) on the indoor unit will light
up.
• To stop, press once more.
■ Setting Mode
• Press 2 to select:-
AUTO – Automatic Operation
COOL – Cooling Operation
DRY – Soft Dry Operation
FAN – Air Circulation Operation
OFF
ON
HEA
T
DR Y F AN
COOL
CHECK
TEMP
AUT
O
AU T UT O FA N AN
AU T UT O
AUT UT O
RESET
CLO CK
AIR SWING
OFF
CANCEL
1
2
3 TIMER
OFF/ON
PO WERFUL
ECONOMY
SLEEP ON
SET
FAN SPEED
MODE
2
3
5
1
6
4
■ Setting Temperature
• Press 3 to increase or decrease the temperature.
• The temperature can be set between 60°F ~ 86°F.
• Recommended temperature:
• During AUTO Operation, press 3 to select:-
• Operation with 4°F higher than the standard
temperature.
• Operation with the standard temperature.
• Operation with 4°F lower than the standard
temperature.
● Standard Temperature
• Once the Automatic Operation is selected, the
indoor temperature sensor operates automatically
to select the desired operation mode with Cooling
or Soft Dry.
• After the operation mode has been selected, the
mode does not change.
Operation
Cooling
Soft Dry
Standard
temperature
77°F
72°F
Indoor
temperature
73°F
COOL
DRY
75°F ~ 78°F
2°F ~ 4°F
Lower than the
room temperature