Peavey PVM 38i - Manual (Page 2)

The 38i also features a refined
shock which provides a
very low sensitivity to annoying handling
and stand noises.
Feedback and coloration from nearby
monitors or the house system are effec-
tively controlled by the very uniform
dioid directional properties.
And the PVM 38i is rugged! With a
tough metal handle and brazed steel
wire outer grille, this microphone comes
ready for the road.
The compact, handsome PVM 38i of-
fers all that is needed for top vocal per-
formance in any venue.
ARCHITECTURAL
ENGINEERING
SPECIFICATIONS
The microphone shall be a moving
dynamic type with a frequency
response of 50 Hz to 16,000 Hz. The
microphone shall have a cardioid polar
characteristic with a rear response that
is about 20
down. The
shall have an output power level of
-56.0
where 0 1
per and nominal im-
pedance of 300 ohms.
The microphone shall have a
reflecting black finish on a solid metal
case and a brazed metal screen. The
connector shall be a
XLR
equivalent audio type and a swivel
adaptor shall be provided to mount on
a stand having
27 thread. The
microphone shall have overall dimen-
sions of
in length and in
diameter. The shall be a
Peavey model 38i or equivalent.
146
DIMENSIONS
INCHES
(MILLIMETERS)
2
WIRING DIAGRAM
HUM COMPENSATION COIL
I
RED I
I
I
BLUE
I
I
(INWARD) PRESSURE ON DIAPHRAGM I
I PRODUCES POSITIVE VOLTAGE AT
I - - - - - - - -