Peavey Sanctuary SSE 15 - Manual

SPECIFICATIONS
SSE ™ 15
Description
The SSE 15 is designed for professional
permanent installations where cabinets
must be flown in order to cover as much
area as possible. The SSE 15 is designed
for arraying on stage, churches
auditoriums or theme parks. The horn has
a coverage pattern of 90˚ in the horizontal
axis and 40˚ in the vertical axis. The highs
are generated using the highly acclaimed
Peavey 14XT titanium compression driver.
The Sound Guard IV tweeter protection
network is built in for driver protection.
The low end is produced using the Peavey
Scorpion Pro 1500+ 15" woofer with 2.5"
(64 mm) voice coil. Connections are made
using a four-pin Neutrik
® Speakon ® or a
paralleled two-position terminal block for
additional cabinets. The SSE 15
incorporates flying points on the top and
bottom for the utilization of the Peavey
VersaMount 70 mounting bracket.
The SSE 15 is constructed with a special
grade of high density 13 mm birch plywood
and covered with a durable acrylic
polyurethane. This finish makes the
enclosure presentable in any application.
The SSE 15 is available in black, white or a
natural wood finish for staining or
painting. The SSE 15 is engineered for
public address and a wide range of
musical applications.
Features:
• Two-way sound reinforcement
enclosure
• Designed for permanent install
• Full-range, wide-band production
from 74 Hz to 17 kHz
• Available in three finishes: black,
white or natural
• Peavey Scorpion ® Pro 1500+ 15"
woofer with 2.5" (64 mm) voice
coil
• Peavey 14XT ™ titanium diaphragm
compression driver
• Sound Guard ™ IV tweeter
protection network
• Seven flying points (six 3/8" for
suspension and one 1/4" for angle
adjustment)
• Mounting point for VersaMount ™
70 bracket
• 13 mm birch plywood
construction
Frequency response, 1 meter on-axis,
swept-sine in anechoic environment:
74 Hz to 17 kHz (±3 dB)
Usable low frequency limit (-10 dB
point):
54 Hz
Power handling:
Full range:
500 Watts program
1,000 Watts peak
Sound pressure level, 1 Watt, 1 meter in
anechoic environment:
Full range:
98 dB SPL (2.83 V input)