Palsonic DVDR313 - Manual (Page 30)

Recording Options
TIMER RECORD
29
Source
Quality
Mode
Date
Start
End
VPS
Item Editor
OK Cancel
1. First setup the clock of your system as “CLOCK SETUP” on page 26.
It is recommended to setup your local date and time.
2. Press TIMER, the record scheduler will pop up.
Note:
If you want to delete a scheduled recording, highlight the specific schedule and press ADD/CLEAR.
2. Use UP/DOWN to select one schedule, and press SELECT to access Item Editor as below:
In each item you can also use direction keys to highlight and press SELECT to choose your
setting:
Signal input source, details see page 27, step 3.
Record quality, details see
page 27 setup record quality.
Record frequency, once, daily or weekly.
Mm/dd/yy
Start time for recording
End time for recording
3. Select CONFIRM to save your settings.
4. Five minutes before the schedule recording is to begin, Record Prompt Menu will appear.
Press Confirm to continue or press Cancel to delete. If no instructions are given, the unit will
record automatically.
Note:
In standby mode, your recorder can wake up in 2 minutes before recording.
During recording, you can press STOP to suspend the recording.
A DVD+R/DVD+RW/DVD-R/DVD-RW can record for up to 360 minutes.
SELECT
TITLE
STOP
Source Quality Date Start End
DV SP 12/01/03 14:41 15:11
Ch057 HQ 12/31/03 12:44 13:05
1
2
3
4
5
6
Record scheduler
SP DAILY 07:03 08:33 Rear CVBS
W
W
W
DV
SP
Once
0 1/0 1 /0 4
12 : 46
1 5 : 1 1
OFF