Planet Technology WL-U357 - Manual (Page 25)

2. Click the Configure button.
3. Select to Use Temporary User Name and Password by choosing the radio button. Check
Manually Prompt for LEAP User Name and Password to manually login and start the LEAP
authentication process.
4. Select to Use Saved User Name and Password by choosing the radio button and specify the
LEAP user name, password, and domain to save and use.
5. Specify a domain name:
o Check the Include Windows Logon Domain with User Name setting to pass the
Windows login domain and user name to the RADIUS server. (default)
o OR: Enter a specific domain name.
6. If desired, check No Network Connection Unless User Is Logged In to force the wireless
adapter to disassociate after logging off.
7. Enter the LEAP authentication timeout time (between 30 and 500 seconds) to specify how
long LEAP should wait before declaring authentication failed, and sending an error
message. The default is 90 seconds.
8. Click OK.
9. Enable the profile.
WPA Passphrase Setting
21