beautypg.com

Candlelight set – Philips Candlelight Set HF8430 User Manual

Page 9

background image

The actual operating time may vary over time, depending on the selected

vibration mode and speed.

Charge the massager when the light ring starts flashing slowly to indicate

that the battery is almost empty.

1

Insert the small plug into the charger and put the adapter in the

wall socket.

Place the massager on the charger. It only fits properly on the

charger with the buttons facing up. (Fig. )

The massager switches off automatically when you place it on the charger.
Note: Make sure the pre-warming function is switched off when you charge

the appliance (see chapter ‘Preparing for use’).
Note: The charger does not work when the massager is placed incorrectly.

During charging the light ring flashes.

Note: When you charge the massager for the first time or after a long period

of disuse, it may take a few minutes before the light ring starts flashing. This

is normal
Note: The appliance may produce a smell the first few times you charge it.

This is normal.

When the battery is fully charged, the light ring goes out.
candlelight set

Charge the candlelight set for 12 hours.

When the candles are fully charged, they have an operating time of

approx. 24 hours.

1

Insert the small plug into the charger and put the adapter in the

wall socket.

The charging light on the charger goes on (Fig. ).

Put one or more candles on the charger (Fig. ).

When the candles are fully charged, the charging light on the

charger goes out and the charging process stops.

,

,

,

,

EnglisH

9