Philips Candlelight Set HF8430 - Manual (Page 17)

Problem Possible cause Solution
The charger of
the
massager does
not work.
The charger is
not plugged in.
Insert the small plug into the
charger and put the adapter in
the wall socket.
The pre-warming
function is
activated.
Press the pre-warming button
to switch off the pre-warming
function.
You have not
placed the
massager on the
charger properly.
Place the massager properly
on the charger (see chapter
‘Charging’).
The massager
and its
charger become
warm during
charging.
This is normal. No further action required.
The charger of
the candlelight
set does not
work.
The charger is
not plugged in.
Insert the small plug into the
charger and put the adapter in
the wall socket.
The candles of
the candlelight
set do not work.
The batteries of
the candles are
empty.
Place the candles on the
plugged-in charger and charge
them for 12 hours.
The candles of
the candlelight
set go on when I
put them on the
charger.
You did not
switch off the
candles when
their batteries
were empty.
Remove the candles from the
charger and tilt them to switch
them off. Then put the candles
back onto the charger.
EnglisH 1