Adjustment – Philips 105E User Manual
Page 13
When pressing any function pad, the "Shift" LED will flash once
to indicate the function has been selected.
1.
Once the limit of the adjustable range has been reached, the shift LED will flash
continuously.
2.
Adjustment
For Tne monitor is pre-set with 6 modes for optimal display size and centering as indicated in the following table:
Mode
Resolution
(dots x lines)
Horizontal
Freq. (KHz)
Vertical
Freq. (KHz)
Remark
VGA
600 X 400
31.5
70
Non-interlaced
VGA
600 X 480
31.5
60
Non-interlaced
VESA / 75
600 X 480
37.5
75
Non-interlaced
VESA / 75
600 X 480
46.9
75
Non-interlaced
VESA / 85
800 X 600
53.7
85
Non-interlaced
VESA
1024 X 768
48.3
60
Non-interlaced
(A) User mode: (10 modes)
The set will save the user's setting parameters automatically.
After 10 seconds of key-pad inactivity, the LED will flash twice to
indicaate the parameters being saved.
●
Press
to recall factory preset mode. (at second level)
●
Front Controls
file:///C|/rita wu/gs3noVE/english/105E/install/front/front.htm (3 of 3) [11/3/2000 11:56:49 AM]