Introduction, Certified product summary, Service information – Polycom MD4000 User Manual
Page 3
MeshDynamics 4000 Series APs
PN: 1725-36164-001_B.doc
3
Introduction
Polycom’s Voice Interoperability for Enterprise Wireless (VIEW)
Certification Program is designed to ensure interoperability and high
performance between SpectraLink Wireless Telephones and WLAN
infrastructure products.
The products listed below have been thoroughly tested in Polycom’s
lab and have passed VIEW Certification. This document details how
to configure the MD4000 series access points (MeshNodes) with
SpectraLink Wireless Telephones.
Certified Product Summary
Manufacturer: MeshDynami
In
Approved products:
Wireless Controllers
Access Points
N/A
MD4000 series APs
RF technology:
802.11b/g/a
Radio:
2.4 GHz, 5 GHz
Security: WPA-PSK
and WPA2-PSK (AES)
AP firmware version certified:
2.5.69
SpectraLink handset models certified: **
e340/h340/i640
8020/8030
SpectraLink handset software certified:
89.110
122.013
SpectraLink radio mode:
802.11b
802.11b 802.11g 802.11a
Maximum telephone calls per AP:
8
8
12 *
10
Recommended network topology:
Switched Ethernet (recommended)
* Maximum calls tested during VIEW Certification. The certified product may actually support a higher
number of maximum calls for 802.11a and 802.11g radio modes.
** SpectraLink handset models 8020/8030, e340/h340/i640 and their OEM derivates are VIEW Certified
with the WLAN hardware and software identified in the table. Throughout the remainder of this
document they will be referred to collectively as “SpectraLink Wireless Telephones”.
Service Information
If you encounter difficulties or have questions regarding the
configuration process, please contact technical support at
If you have questions related to this guide, please contact the Polycom
Customer Support Hotline at 1-800-775-5330. The hotline is open