Polycom MD4000 - Manual (Page 10)

Configuration Guide
PN: 1725-36164-001_B.doc 10
QOS Settings
1. Click the VLAN tab in the Node Configuration window.
2. To adjust QoS settings, click the “New VLAN” icon.
3. Click the “
… ” button to the far right of 802.11e Category to edit the
802.11e category for that Node.
4. Select Voice from the 802.11e Access Category drop-down list.
5. Set ACWmin to 0 and ACWmax to 0 .
6. Set AIFSN :
a. to 2 if the SpectraLink Wireless Telephones are configured for
802.11a or 802.11g only.
b. to 3 if the SpectraLink Wireless Telephones are configured for
802.11b & b/g mixed.
7. Set Burst Time to 0 .
8. Select the Disable Backoff check box.
9. Click the OK button to update settings.
.
10. Reboot the Node for settings to take effect.
Configuring a VLAN on the radio is not required to edit the 802.11e
category.
“New VLAN”
icon