Warnings and alarms – Pentair IntelliPro VS-3050 User Manual

Page 14

Warnings and Alarms

If an alarm condition occurs, the pump will stop running and the red LED will fl ash

continuously to indicate the presence of an alarm. The alarm LED will reset when the

condition

clears.

Alarm and Warning

Refer to page 33 of the IntelliPro

VS-3050

Installation and User’s Guide for specifications

LED Sequences

that should be followed when Alarms or Warnings are indicated.

Drive Temperature

Green LED will blink 2 times.

Warning

Alarm Conditions

Unknown Alarm

Drive Temperature
Alarm

Power Out Alarm

Over Current Alarm

Over Voltage Alarm

Green LED will blink 5 times.

Green LED will blink 6 times.

Green LED will blink 7 times.

Green LED will blink 8 times.

Green LED will blink 9 times.

IntelliPro

™

VS-3050

Quick-Start Guide