Pentair IntelliPro VS-3050 - Manual (Page 10)

Turn the pump clamp and lid in a counterclockwise direction until they stop, and remove.
Fill the pump strainer pot with water.
Reinstall the pump clamp and lid onto the strainer pot. The pump is now ready to prime.
Make sure all electrical connections are clean and tight.
Re-open all closed valves.
Open the air release valve on the filter, and stand clear of the filter.
Switch IntelliPro VS-3050 on at the circuit breaker. Ensure that the green power light is on.
Press the Speed 4 button to select pump speed of 3110 RPM.
Press the Start button.
Use the Up/Down button to increase speed as necessary to prime the pump.
When water comes out of the air release valve, close the valve. The system should now be
circulating water back to the pool without air bubbles showing in either the hair and lint pot
or at the pool return fittings.
To Prime the
IntelliPro
VS-3050
IntelliPro ™ VS-3050 Quick-Start Guide
8