Priming the intellipro – Pentair IntelliPro VS-3050 User Manual

Page 11

Text mode
Original mode

Priming the IntelliPro

VS-3050

Ensure that the pump is powered on and the green power LED light is on.

Press the Start button to start the pump.

Press the Stop button.

The IntelliPro

VS-3050

is a variable speed pump with four Speed buttons preset

to the following:

1 = 750 RPM
2 = 1500 RPM
3 = 2350 RPM
4 = 3110 RPM

To select these preset speeds, press the Start button to start the pump – make sure green
power LED light is on. Press the desired Speed button for less than three seconds to select
the preset pump speed.

Starting the Pump

Stopping the Pump

IntelliPro Speed Settings

IntelliPro

™

VS-3050

Quick-Start Guide