Panasonic BL-WV10 - Manual (Page 12)

Getting Started
12
8. Select [Next], then press ENTER.
9. When the following screen is displayed, select [Yes], then press ENTER to
use the BL-WV10’s Quick Setup utility to configure the cameras (see
page 12).
1.3.3 Quick Setup (When Using a Router)
To use the BL-WV10 with your cameras and a router, you will need to configure the
BL-WV10 and each device. The BL-WV10’s Quick Setup utility can help you
configure the devices easily.
1. Wait while the Quick Setup utility scans for network settings.
• When the BL-WV10 and router have been configured, [Finished] is
displayed and the buzzer sounds.
2. Use an Ethernet cable to connect a camera to one of the LAN jacks on the
BL-WV10 or to one of the LAN jacks on the router.
Note
• Connect a wireless camera to the BL-WV10 using an Ethernet cable during
Quick Setup.
BL-WV10_GS-en.book Page 12 Wednesday, January 25, 2006 5:18 PM