Precisionaire Rings Panels Filter ST55R-2020 - Manual (Page 4)

170
Conversion Formula for square inches to square feet
HOW TO FIND CUSTOM PAD PRICING
SA600-G10 and SAR-1 Custom Media Pads
First find how many square feet are in the custom
pad
Do this by taking the length times the width in inches
and dividing by 144.
Example: 53.5"x24.5" = (53.5x24.5 / 144) = 9.10
square feet
Second, multiply the square feet of the pad by the
LIST price
(SA600=$4.00 sq.ft./SAR1=$2.00 sq.ft.)
Example SA600 G10 pad: 53.5"x24.5" = 9.10 sq. ft.
so I multiply 9.10x4 = $36.40 LIST price for that pad
Third, find the list price by multiplying the LIST
price by the MULTIPLIER from the IDC code list
The SA600-G10 multiplier for a jobber is .35 so I
take $36.40x.35 and that is their cost
(SA600=S1/SAR1=S2)
The multiplier list is at the back of the catalog, and
each product has a different multiplier
Check your IDC code reference in the catalog to veri-
fy you are applying the correct multiplier
We will then create a part number for that size and
will include the part in our next catalog.
All other custom media pads
For all other medias, a custom range has been
established. To find the correct part number, sim-
ply multiply the length times the width in inches to
get the total square inches of the pad.
EXAMPLE: 30"x30" = 900 square inches.
Second, find the range that the part numbers falls
in. For this size, the part number should be ****-
900-999. This signifies any pad from 900 to 999
square inches.
Be sure to include the exact size pad you want
with the custom part number.
Custom media rolls
We can make any width roll desired for polyester
or fiberglass medias. The polyester media can
simply be cut in house on our band saw, the fiber-
glass must be custom run from the glass plant and
will have a longer lead time.
There is a $2.00 custom slit charge for custom
width poly rolls. Please call customer service for
custom roll pricing.
A good general guide is to take a similar standard
roll, and divide the LIST price by the inches in
width. Then multiply the inches in width by the
desired width and add a $2.00 slit charge.
EXAMPLE: A 20" wide roll of 1GT media is LIST price
is for $175.00. If you want a 22" roll, divide 175 by
20 = $8.75
The list is $8.75 per inch of width. Then multiply
$8.75 times 22 = $192.50
Then multiply the new price by your multiplier for the
particular media desired, and add $2.00 to the net
figure.
Manufacturing
Specifications
For for Media Rolls & Blankets