Precisionaire PrecsionCell M16 PB1007-0307 - Manual

PrecsionCell M16
General
Flanders introduces the newest member of the
PrecisionCell design family. This filter that has been
tested and certified to be MERV 16 or higher for
applications requiring higher efficiency than our
standard ASHRAE filters and lower pressure drops
than traditional DOP filters.
Installation Considerations
The PrecisionCell M16 filters are manufactured with
wet laid micro fiberglass media. The media is 100%
separatorless and self-supporting. This means there
are no glue beads, media strips, or string separating
the media pack. The deletion of aluminum separators
makes the filter incinerable and easy to dispose of.
The frame is constructed of either 24 GA galvanized
steel, 0.063” aluminum or thin gauge stainless steel.
The filter media is sealed to the frame on all (4) sides
with a two component flame retardant solid urethane.
PrecisionCell M16 is available in a box style, header
style, or double turn flange frame configuration.
Various gasket material options are available and are
applied to conform to customer requirements.
Precision Cell M16 filters are UL900 Class 1 rated.
Separatorless Self-Supporting
Micro Fiberglass Filter
PB1007-0307
Product Superiority
The product offers the following advantages over
conventional ASHRAE filters.
Maximum Media Area
Gasket seal filters have 265 sq. ft. of media
compared to 125 sq ft for traditional ASHRAE
filters. The greater media area provides a longer
time period between filter replacements.
Exceptional Efficiency
The significant quantity of media translates into an
extremely low media velocity. Therefore a minimum
overall efficiency of 92% at 0.3µm and a MERV 16
per ASHRAE standard 52.2.
Minimal Pressure Drop
The typical DOP rated filter pressure drop can
range from 1.4”w.g. to 1.8”w.g. at the rated flow.
The pressure drop of the PrecisionCell M16 is
0.8”w.g. at the rated flow.
Physical Data
Frame: 24 ga. corrosion-resistant steel. Other
frame materials are also available.
Media: Moisture-resistant micro-fine fiberglass
paper, sealed in the frame with Class 1
urethane.
Separators: Hemmed corrugated aluminum.
Flanders also offers an exclusive Pureform®
separatorless model. Contact factory.
Headers: 13/16 “ wide corrosion-resistant steel
Operating Limits: 100% RH and 250
0 F
Actual Face: Nominal size less 5/8”
Actual Depth: 5-7/8” or 11-1/2”
Important Features
• Maximum Media Area
• Exceptional Efficiency
• Minimal Pressure Drop
Flanders Filters ~ Foremost in Air Filtration
Toll Free: 1-800-637-2803
®
F O R E M O S T I N A I R F I LT R AT I O N