Precor AMT 835 User Manual
Page 36
34
Assembling and Maintaining Adaptive Motion Trainers: AMT 885 /835
To thread the cable assembly:
1.
Make sure that as much of each cable as possible passes
through the opening in the middle of the console mount
on the base unit.
2.
Position the console over the console mount.
3.
Rest the console on the console mount so that the notch
on the bottom of the console’s back plate rests on the
rectangular hook at the bottom of the console mount, as
shown in the following figure.
Figure 16: Console positioning on base unit
4.
Tilt the console forward until it stops. Use one hand to
steady the console in this position, or ask your assistant
to do so.
5.
Pull all cables upward and forward until you can drape
them over the top of the console’s back plate.