beautypg.com

English, Confromity, environment & safety, Conformity, environment & safety – Philips Onis 300 Vox User Manual

Page 2: Using gap standard compliance, Using a non-philips gap base station, Using philips base stations

background image

Conformity, Environment & Safety

Safety information : This equipment is not designed to make emergency calls when power

fails.An alternative should be made available for access to emercgency calls.

Conformity : See page 9.A copy of the original certificate can be obtained on request to the

customer care centre.

Power requirements : This product requires an electrical supply of 220-240 volts, alternating

monophased current, excluding IT installations defined in standard EN 60-950.

WARNING ! The electrical network is classified as dangerous according to criteria in the

standard EN 60-950.The only way to power down this product is to unplug the power supply

from the electrical outlet. Ensure the electrical outlet is located close to the apparatus and is

always easily accessible.

Telephone connection : The voltage on the network is classified as TNV-3 (Telecommunication

Network Voltage as defined in the standard EN 60-950)

Safety precautions : Do not allow the handset to come into contact with water. Do not open

the handset.You could be exposed to high voltages. Do not allow charging contacts or batteries

to come into contact with conductive materials.

Environmental care : Please remember to observe the local regulations regarding the disposal

of your packaging materials, exhausted batteries and old phone and where possible promote

their recycling.

Using GAP standard compliance

The GAP standard guarantees that all DECT

TM

GAP handsets and base stations comply with a

minimum operating standard irrespective of their make.Your handset is GAP compliant, which

means the minimum guaranteed functions are : take the line, receive a call and dial.

Using a non-Philips GAP base station

To register the Philips additional handset to a non-Philips base station, follow the base station

instructions described by the other manufacturer.Then follow the instructions on page 4 to

register the Philips additional handset.There will be only a few menus availble.

Using Philips base stations

If you register the additional handset to a Philips Onis 300 or Onis 380 base station, the handset

will have all the features described in the corresponding complete set user guide.

If you register the additional handset to a Philips Onis 200 or Zenia base station, only a limited

number of menus will be available. Please refer to the corresponding complete set user guides.

English

Philips has marked the battery and packaging with standard symbols designed to promote the

recycling and appropriate disposal of your eventual waste.

The labelled packaging material is recyclable.

A financial contribution has been paid to the associated national recovery & recycling system.

DECT

TM

is a trade mark of ETSI registered for the benefit of the implementers of the DECT technology

Conformity, Environment & Safety

1

Uk part_2.qxd 24/02/03 13:23 Page 1

This manual is related to the following products: