Perle Systems CM-110-XXXXX - Manual (Page 13)

Perle 10/100 Media Converter Module – Installation Guide 13
Operation
Status LED
The Perle 10/100 Ethernet Media Converter Modules have six single color
status LEDs located on the face plate of the module.
PWR
On – Power is on; module is
operating normally
Blinking (slow) – The module is in
Loopback mode.
Blinking (fast) – The module has a
hardware failure.
FDF (fiber)
On – Full Duplex Mode.
Off – Half Duplex Mode.
LKF (fiber )
On – The fiber link is present
Off – No fiber link is present.
Blinking (fast) – The fiber link is
present and receiving data.
100 (copper speed)
On – 100 Mbps
Off – 10 Mbps
FDC (copper)
On – Full Duplex Mode.
Off – Half Duplex Mode.
LKC (copper)
On – The copper link is present.
Off – No copper link present.
Blinking (fast) – The copper link is
present and receiving data.