beautypg.com

8 hookups (cont’d) – Philips DVD750VR User Manual

Page 8

background image

8 Hookups (cont’d)

75

ANT /

CABLE

COAXIAL

S-VIDEO

OUT

DIGITAL

AUDIO OUT

AUDIO

OUT

COMPONENT

VIDEO OUT

L

Y

R

CB

CR

DVD

OFF

PROGRESSIVE

ON

AUDIO OUT

VIDEO OUT

AUDIO IN

VIDEO IN

L

R

L

R

DVD/VCR

VCR

ANT-IN

ANT-OUT

75

ANT /

CABLE

AUDIO OUT

VIDEO OUT

AUDIO IN

VIDEO IN

L

R

L

R

DVD/VCR

VCR

ANT-IN

ANT-OUT

Black RF

coaxial cable

(supplied)

Antenna or

Cable TV

signal

1

Disconnect the antenna or Cable TV signal from your TV and con-
nect it to the ANT-IN (Antenna In) jack of your DVD/VCR.

2

Connect the supplied black RF coaxial cable to the ANT-OUT
(Antenna Out) jack on the back of the DVD/VCR and to the
ANTENNA IN JACK on the TV.
The ANTENNA IN jack on the TV may be
labelled TV IN, RF IN, 75

Ω (ohm), or ANT-IN. See your TV owner’s manual for

assistance.

3

Plug in the power cords of the TV and the DVD/VCR.

4

Set your TV to channel 3 or 4. The DVD/VCR’s output channel is 3 when
you purchase it. So, set your TV to channel 3 when the DVD/VCR is new.
If you cannot use channel 3 at your TV, you can change the DVD/VCR’s output
channel to channel 4.To do so, press the VCR button to put the DVD/VCR in
VCR mode.The green VCR light will be on the front of the DVD/VCR. Insert a
videotape and press PLAY B to start playback.

During playback, press

and hold the (VCR) PLAY B button on the front of the DVD/VCR
for three to five seconds.
Each time you do this, the DVD/VCR’s output
channel switches between 3 and 4. Change your TV to channel 3 or 4 accord-
ingly. (You cannot change the DVD/VCR’s output channel while adjusting track-
ing manually. Press STOP C to stop play and cancel manual tracking, then press
PLAY B to resume play and change the output channel.)
There is not a channel 3/4 switch on the DVD/VCR (as customary with most
VCRs).

5

You are ready to turn on the DVD/VCR. Go to page 17 before turn-
ing on the DVD/VCR.

Antenna In Jack
(on back of TV)

example only

DVD/VCR to TV only

Simplest connection using only the supplied black RF coaxial cable

This connection will let you use the features of both the VCR and the DVD Player.

1

2

H9420UD(p1-51).QX4 03.7.18 11:59 AM Page 8

This manual is related to the following products: