Philips DVD750VR - Manual (Page 45)

Tape Counter 45
• You may only set the counter to
zero at one location at a time.
Setting the counter to zero at a sec-
ond location will erase the previous
zero setting.
• If you remove the tape, the counter
will reset to zero at the point at
which you last stopped playback
whenever you reinsert the tape.
Helpful Hints
STOP
SLP 1 : 23 : 45 HIFI
Follow the steps below to reset the VCR’s real-time tape counter
to zero at a tape location you want to refer to later.
1 Press VCR, then play, fast forward, or rewind a tape
to the location that you would like to refer to later.
Press STOP C to stop the tape.
2 Press DISPLAY to see the status display.
3 While the counter is on the screen, press
CLEAR/RESET to reset the counter to zero.
STOP
SLP 0 : 00 : 00 HIFI
4 When you later want to return to this point on the
tape, press DISPLAY so you can see the counter
(while tape play is stopped). Press h or g.
As the tape rewinds or forwards, watch the counter.When
it reaches zero, press PLAY B to play the tape.
STANDBY-ON
PLAY
VCR/TV
VCR DVD
OK
MENU MENU
SYSTEM
RETURN TITLE
A-B
CLEAR/RESET SLOW
SUBTITLE ZOOM ANGLE
REPEAT REPEAT AUDIO
SEARCH MODE DISPLAY
SKIP / CH
DISC/VCR
PAUSE STOP
VCR Plus+ RECORD TIMER SET
SPEED
1 2 3
7 6 5 4
8 9 0 +10
2,4
4
1
1
3
H9420UD(p1-51).QX4 03.7.18 11:59 AM Page 45