Philips CD685 - Manual (Page 12)

12 EN
Install the handset
Caution
• Risk of explosion! Keep batteries away from
heat, sunshine or fire. Never discard batteries
in fire.
• Use only the supplied batteries.
• Risk of decreased battery life! Never mix
different brands or types of batteries.
Note
• Charge the batteries for 8 hours before first use.
• If the handset becomes warm when the
batteries are being charged, it is normal.
Warning
• Check the battery polarity when inserting in the
battery compartment. Incorrect polarity may
damage the product.
The batteries are pre-installed in the handset.
Pull the battery tape off from the battery door
before charging.
Set the country/language
Select your country/language, then press [OK]
to confirm.
» The country/language setting is saved.
Note
• The country/language setting option is country
dependent. If no welcome message is displayed,
it means the country/language setting is preset
for your country. Then you can set the date and
time.
Set the date and time
1
Select [Menu] > > [Date & time], then
press [OK] to confirm.
2
Select [Set date] or [Set time], then press
[OK] to confirm.
3
Press the numeric buttons to enter the
date and time.
Note
• If the time is in 12-hour format, press * to select
[AM] or [PM].
4
Press [OK] to confirm.
Set the date and time format
1
Select [Menu] > > [Date & time], then
press [OK] to confirm.
2
Select [Date format] or [Time format].
3
Press / to select [DD/MM/YY] or
[MM/DD/YY] as the date display, and [12
Hours] or [24 Hours] as the time display.
Then press [OK] to confirm.
» The setting is saved.
Note
• The date and time format setting is country
dependent.