Premier Mounts AM3-B - Manual (Page 9)

Installation Instructions Page 9
AM3/AM3-B
Nose Piece Orientation
Step 1. Once the mount has been oriented and mounted to the wall, remove the nose piece by removing the tensions bolts.
After loosening the tension bolts, be sure that the nose piece is held together tightly before rotating.
Step 2. Detach the nose piece assembly, rotate 180°, and place back onto the mount (Figure 7).
Step 3. Slide the tension bolt back into the holes and attach the nuts from the backside of the nose assembly. Tighten the tension bolts
(Figure 8).
Figure 7
Right Side Orientation Left Side Orientation
Rotate Nose
180°
Back Side of Nose Piece Front Side of Nose Piece
Figure 8
Tension Bolts Tension Bolts