Premier Mounts AM3-B - Manual (Page 13)

AM3/AM3-B
Installation Instructions Page 13
Tilt Positioning
To adjust the display, loosen the tension bolts no
more than ½ turn, make the adjustments and then
tighten the tension bolts.
When tilt positioning is needed to adjust the display, place a hand at
the top corner of the display and the other hand at the bottom of the
display (Figure 15).
To Tilt the Display
Gently push both hands inward. This motion will cause the display
to tilt forward.
To Tilt the Display Back
Gently push both hands outward. This motion will cause the display
to tilt forward.
Cable Access Holes
Once the display has been mounted and adjusted, route the cables
through the cable access holes and to their respective locations
(Figure 16).
Figure 15
Tilt/Pivot Point
Figure 16
Cable Access Holes