Pioneer FH-P6200 - Manual (Page 33)

Recalling sound field programs
Here is a list of the sound field programs:
Button DisplayEffect
1 STUDIO Studio
2 JAZZ CLUB Jazz club
3 CLUB Club
4 BBE BBE
1 Press DSP to select the sound field con-
trol.
Press DSP until SFC appears in the display.
# If the sound field control has been previously
set to a sound field program then the title of that
previously selected sound field program will be
displayed instead of SFC.
2 Select a sound field program by press-
ing 14.
Select the desired sound field program by
pressing one of the numbered buttons, from
14, which correspond to the different sound
field programs as listed above.
# You can also sequentially select a sound field
program by pressing c or d.
Adjusting BBE sound level
With BBE sound processing technology, you
can adjust the level of BBE.
1 Recall BBE.
See Recalling sound field programs on this
page.
2 Press a or b to adjust the level of BBE.
Each press of a or b increases or decreases
the level of BBE.
+4 4 is displayed as the level is increased
or decreased.
Using the graphic equalizer
The graphic equalizer lets you adjust the
equalization to match car interior acoustic
characteristics as desired.
Recalling equalizer curves
There are seven stored equalizer curves which
you can easily recall at any time. Here is a list
of the equalizer curves:
DisplayEqualizer curve
S-BASS Super bass
POWER Powerful
NATURAL Natural
VOCAL Vocal
FLAT Flat
CUSTOM1 Custom 1
CUSTOM2 Custom 2
! CUSTOM1 and CUSTOM2 are adjusted
equalizer curves that you create. Adjust-
ments can be made with a 9-band graphic
equalizer.
! When FLAT is selected no supplement or
correction is made to the sound. This is
useful to check the effect of the equalizer
curves by switching alternatively between
FLAT and a set equalizer curve.
1 Press DSP to select the graphic equali-
zer.
Press DSP until POWER appears in the dis-
play.
# If the graphic equalizer has been previously
set to an equalizer curve other than POWER then
the title of that previously selected equalizer
curve will be displayed instead of POWER.
Digital Signal Processor
En
33
English
Section
09