Tuner listening to the radio 10, Listening to the radio, Tuner – Pioneer FH-P6200 User Manual

Page 10

Listening to the radio

These are the basic steps necessary to operate

the radio. More advanced tuner operation is

explained starting on the next page.

Important

If you are using this unit in North, Central or
South America, reset the AM tuning step (see
Setting the AM tuning step on page 37).

1 Band indicator

Shows which band the radio is tuned to, AM

or FM.

2 Stereo (5) indicator

Shows that the frequency selected is being

broadcast in stereo.

3 Frequency indicator

Shows to which frequency the tuner is

tuned.

1 Press SOURCE upward or downward to

select the tuner.

Press SOURCE until you see Tuner displayed.

2 Use VOLUME to adjust the sound level.

Press VOLUME on the head unit upward to in-

crease the volume, and press downward to

lower the volume.

3 Press BAND to select a band.

Press BAND until the desired band is dis-

played, F1, F2, F3 for FM or AM.

4 To perform manual tuning, press c or

d with quick presses.

The frequencies move up or down step by

step.

5 To perform seek tuning, press and hold

c or d for about one second and release.

The tuner will scan the frequencies until a

broadcast strong enough for good reception is

found.

# You can cancel seek tuning by pressing either
c or d with a quick press.
# If you press and hold c or d you can skip
broadcasting stations. Seek tuning starts as soon
as you release the buttons.

Note

When the frequency selected is being broadcast
in stereo the stereo (5) indicator will light.

Tuner

Section