Philips FW-C39 - Manual (Page 19)

3139 116 19401
19
English
STANDBY-ON
TAPE 2
PLAYBACK
TAPE 1
FW- C10 MINI HIFI SYSTEM
C D 1 • 2 • 3 BAND TAPE 1 • 2
TAPE CD TUNER AUX
PRESET ▲ ▲ TUNING ▲ ▲ ▲ ▲
STOP• CLEAR SEARCH PLAY• PAUSE PREV NEXT
3 C D ROTARY
CHANGER
SYSTEM
•
CD
REWRITABLE
C OMPATIBLE
•
CD
SYNCHRO
RECORDING
•
D B B
CDR/VIDEO JOG
CONTROL
SOUND NAVIGATION - JOG VOLUME
PROGRAM DIM RECORD DUBBING A.REPLAY INCREDIBLE SURROUND
CLOCK • TIMER
V E C
D S C
T E C H N O
R O C K
J A Z Z
O P T IM A L
OPEN
▲
OPEN
▲
Notes:
– If you do not intend to record via the
microphone, unplug the microphone to
avoid accidental mixing with other
recording source.
– For recording, use only tape of IEC type I
(normal tape) or IEC type II (Cr02).
– The tape is secured at both ends with
leader tape. At the beginning and end
of tape, nothing will be recorded for six
to seven seconds.
– The recording level is set automatically,
regardless of the position of VOLUME,
DBB, Incredible Surround, DSC or VEC.
– To prevent accidental recording, break
out the tab on the left shoulder of the
tape side that you want to protect.
– If " CHECK TAPE" is displayed, the
protection tab has been broken. Put a
piece of clear adhesive tape over the
opening. Do not cover the Cr02 tape
detection hole when covering the tab
opening.
Recording the mixed sound /
One Touch Recording
• During microphone mixing, you can
record the mixed sound on a tape in
tape deck 2 except dubbing mode.
• For One Touch Recording, as soon as you
press RECORD, the current source (CD,
TUNER or AUX) will be recorded on tape
deck 2.
RECORDING
1 Load a blank tape in tape deck 2.
2 Press RECORD to start recording.
™ The REC flag starts flashing.
3 Press Ç to stop recording.
Note:
– When you press RECORD while in TAPE
mode, " SELECT SOURCE" will be
displayed. One Touch Recording is not
possible in TAPE mode.
CD Synchro Start Recording
1 Load a blank tape into tape deck 2 and a
disc into a disc tray.
2 Press CD to select CD mode.
• You can program the tracks in the order
you want them to be recorded (see
Programming Tracks). If not, select the
disc by pressing CD (CD 1•2•3) and the
tracks are recorded according to the
order on the selected disc.
3 Press RECORD to start recording.
™ The REC flag starts flashing.
• CD will start playback automatically.
4 Press Ç to stop recording.
pg 01-24/C38-39/21&/30-En 3/3/00, 4:24 PM 19